NTT to demo new subsea cable fibre-optic system at 1.44 petabit

  • Blink and you’ll more than miss it
  • System equates to the simultaneous transmission of 5,000 HDTV films in one second
  • 12 cores in a square lattice optimises capacity of standard 125 micron fibre
  • But…. commercial deployment is 10 years away

Submarine cables may not be the sexiest of technologies but they are robust, dependable, they do the job and, as history has shown, can be tweaked and tweaked again to provide faster and more efficient communications.

abstract-blue-light-vector-background-310-160Even though research into and development of improved subsea cables continues apace it seldom gets the sort of industry or media attention that is routinely lavished on 5G or network transformation based on SDN and NFV. However, today comes the news that the Japanese telco, NTT, is about to demonstrate a new fibre-optic system that, by placing 12 separate cores (or light paths) within a single 125 micron glass fibre, will be able to handle traffic at 1.44 PETABIT per second.

Lest we forget the order of magnitude being achieved here, a petabit is one quadrillion binary digits or one thousand terabits.

RELATED: Google and Facebook invest in trans-Pacific infrastructure

Back in 2012 in partnership with Fujikura, Hokkaido and the Technical University of Denmark, NTT demonstrated one petabit transmission on a single-strand 12 core fibre over a distance of 52.4 kilometres – the equivalent of simultaneously transmitting 5,000 two-hour-long HDTV-standard movies in a single second.

Generally, efforts to increase optical network capacity to accommodate ever-increasing data traffic have been focused on lowering the cost of infrastructure by developing more efficient optical communications equipment whilst maintaining the current and proven structure of the optical fibre itself. The fibre most commonly deployed in extant long-haul networks is a terabit per second.

Related: ITU Interactive Transmission Map and Submarine Cable Map

The problem with multi-core fibres is that light can actually ‘leak’ through and between neighbouring strands with crosstalk, interference and loss or degradation of signal and transmitted data. NTT scientists have been working to pack more spatial paths into fibres to ensure than each glass strand can accommodate multiple paths.

NTT scientists have concentrated on placing 12 cores in a square lattice after also having  looked at the viability of a 10 core circular model and a 19 core hexagonal model. It turns out that the 12 core configuration is the optimum configuration within a normal 125 micron fibre. The 10 core model resulted in reduced throughput of data while the 19 core, whilst it did provide more data throughput, could not be crammed into a 125 micron fibre. It needed 250 microns and that obviated the raison d’etre of the research given that the task was to increase throughput in 125 micron fibre.

RELATED: Electronic highways under the sea

The full details of the trial and its results will be released and debated at the OFC’s Optical Networking and Communication Conference and exhibition to be held in Los Angeles, California between March 19 and March 23. However, as far as commercial deployment of the new technology is concerned, NTT says it is at least a decade away.

The original version of this article first appeared in Telecom TV. 

Telecom TV delivers daily insight on the converging worlds of telecoms, media and entertainment. Views expressed in this article from Telecom TV do not necessarily reflect those of ITU.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: